PIAGGIO Beverly Tourer 300 i.e. - Steering Column

- Bleed the hydraulic rod by actuating the stem re-
peatedly.
- Fit the spring into the stem.
- Lubricate the closing cap O-ring of the stem.
- Preload the spring, fit the closing cap and tighten
to the prescribed torque.
Locking torques (N*m)
Fork locking screws cap 15 ÷ 30
- Repeat the procedure for the other fork leg.
N.B.
IF BOTH FORK LEGS ARE SERVICED AT THE SAME TIME, BE CAREFUL NOT TO INVERT THE
RIGHT FORK LEG WITH THE LEFT ONE.
Steering column
Suspensions Beverly Tourer 300 i.e.
SUSP - 222