PIAGGIO Beverly Tourer 250 i.e. - Front mudguard; Radiator fan

See also
Knee-guard
Front wheel housing
Footrest
Front mudguard
- Remove the retaining screw of the cable lead
through support on the right-hand side of the mud-
guard. - Loosen the 3 fixing retaining screws indi-
cated in the figure and remove the mudguard.
Radiator fan
- Remove the front wheel housing.
- Prepare a container for the coolant.
- Remove the expansion tank outlet and return
pipes.
- Remove the coolant supply and return pipes from
the radiator.
- Loosen the screw mounting the radiator to the
frame.
- Disengage the radiator and the electric fan.
See also
Front wheel housing
Chassis Beverly Tourer 250 i.e.
CHAS - 258