PIAGGIO Beverly Tourer 250 i.e. - Rear handlebar cover

Rear handlebar cover
- Remove the windshield.
- Remove the rear-view mirrors.
- On both sides of the handlebar undo the screw
indicated and remove the brake pump compart-
ment inspection cover.
- Undo the screw indicated.
- From below undo the screw fixing it to the front
handlebar cover.
- Undo the two screws fixing it to the frame.
- Remove the rear handlebar cover after discon-
necting the electrical connectors and the odometer
cable.
Beverly Tourer 250 i.e. Chassis
CHAS - 247