PIAGGIO Beverly Tourer 250 i.e. - Page 92

Remove the retaining bolts of the rear brake cal-
liper.
Remove the lower screw of the left-hand shock
absorber.
- Use a jack to support the vehicle properly. Re-
move the engine-swinging arm fixing pin by undo-
ing the nut and the head of the pin as shown in the
photograph.
- The engine is now free.
When refitting the engine onto the scooter, carry out the removal operations but in reverse order and
respect the tightening torques shown in the Specifications Chapter.
- Check the engine oil level and if necessary, top it up with the recommended type.
- Fill and bleed the cooling circuit.
- Check accelerator and electric devices for correct functioning.
CAUTION
Engine from vehicle Beverly Tourer 250 i.e.
ENG VE - 92