- Replace the outer O-ring and grease properly.
WARNING
IN ORDER TO PREVENT ABNORMAL FORMATIONS OF
DIRT DUE TO THE RELEASE OF GREASE, WE RECOM-
MEND FIRST LUBRICATING THE SEAL RING STOPS WITH
A BRUSH.
DISASSEMBLY
- Insert the clutch assembly in the special tool and
tighten the three wing nuts until you hear the end
of stroke.
- Prepare two aluminium protections in the vice
and tighten the shaft of the driven pulley.
Specific tooling
020919Y Clutch discs disassembly tool
Engine MP3 400 hpe E5
ENG - 44
To Next Page
Loading...
