Pickering 41-670 - Page 38

Page 4.18
SECTION 4 - PROGRAMMING GUIDE
PXI/PXIe LVDT/RVDT/Resolver Simulator Module 41/43-670
pickering
ATTR_VDT_LOS_THRESHOLD = 0x465,
/* Sets/Gets DWORD (0 to 32768) for LOS Threshold (Default = 32768) */
ATTR_VDT_SMPL_BUFFER_SIZE = 0x466,
/* Sets/Gets DWORD (1 to 500) for Sample buffer size (Default = 500) */
ATTR_VDT_NULL_OFFSET = 0x467,
/* Sets/Gets WORD (0 to 100) for null offset (Default = 0) */
//Get Only Attributes
ATTR_VDT_STATUS = 0x468,
/* Gets BYTE value (0x00 or 0x01) checking LOS status */
ATTR_VDT_MAX_OUT_VOLTAGE = 0x469,
/* Gets DOUBLE value for maximum output voltage */
ATTR_VDT_MIN_OUT_VOLTAGE = 0x46A,
/* Gets DOUBLE value for minimum output voltage */
ATTR_VDT_MAX_IN_VOLTAGE = 0x46B,
/* Gets DOUBLE value for maximum input voltage */
ATTR_VDT_MIN_IN_VOLTAGE = 0x46C,
/* Gets DOUBLE value for minimum input voltage */
ATTR_VOLTAGE_V = 0x441
/* Sets/Gets DOUBLE value of Voltage in V */
ATTR_VDT_DSPIC_VERSION = 0x45F,
/* Gets DWORD value of for dsPIC rmware version 104 = v0.01.04 */
Attributes Specic to LVDT
ATTR_VDT_ABS_POSITION = 0x451,
/* Sets/Gets DWORD (0-32767) for Both Outputs on LVDT_5_6 WIRE & OutputA on LVDT_4_WIRE */
ATTR_VDT_ABS_POSITION_B = 0x452,
/* Sets/Gets DWORD (0-32767) for OutputB on LVDT_4_WIRE */
ATTR_VDT_PERCENT_POSITION = 0x453,
/* Sets/Gets DOUBLE (-100.00% to 100.00%) for Both Out on LVDT_5_6 WIRE & OutA on LVDT_4_WIRE */
ATTR_VDT_PERCENT_POSITION_B = 0x454,
/* Sets/Gets DOUBLE (-100.00% to 100.00%) for OutB on LVDT_4_WIRE */