PicoScope 3000A Series Prog rammer's Guide 103
Copyright © 2011-2013 Pico Technology Limited. All rights reserved. ps3000abpg.en r9
2.12.60
ps3000aStop
PICO_STATUS ps3000aStop
(
short handle
)
This function stops the scope device from sampling data. If this function is called
before a trigger event occurs, the oscilloscope may not contain valid data.
Always call this function after the end of a capture to ensure that the scope is ready
for the next capture.
handle, the handle of the required device.
PICO_OK
PICO_INVALID_HANDLE
PICO_USER_CALLBACK
PICO_DRIVER_FUNCTION
To Next Page
Loading...
Need help?
General
