Prog ramming the 3000A Series oscilloscopes32
Copyright © 2011-2013 Pico Technology Limited. All rights reserved.ps3000abpg.en r9
2.12.9
ps3000aGetChannelInformation
PICO_STATUS ps3000aGetChannelInformation
(
short handle,
PS3000A_CHANNEL_INFO info,
int probe,
int * ranges,
int * length,
int channels
)
This function queries which ranges are available on a scope device.
handle, the handle of the required device.
info, the type of information required. The following value is
currently supported:
PS3000A_CI_RANGES
probe, not used, must be set to 0.
* ranges, an array that will be populated with available
PS3000A_RANGE values for the given info. If NULL, length is set to
the number of ranges available.
* length, on input: the length of the ranges array; on output: the
number of elements written to ranges array.
channels, the channel for which the information is required.
PICO_OK
PICO_HANDLE_INVALID
PICO_BUSY
PICO_DRIVER_FUNCTION
PICO_NOT_RESPONDING
PICO_NULL_PARAMETER
PICO_INVALID_CHANNEL
PICO_INVALID_INFO
To Next Page
Loading...
Need help?
General
