Pinell SUPERSOUND 201 - FM Radio Mode; Selecting FM Mode and Scanning

11
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually scan, while FM frequency shows up, turn SCROLL knob clockwise or
anti-clockwise to change frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press SCROLL knob your radio will
automatically search until it reached the next available station.
Scan settings
This enables you set FM scans stop at stations with strong signal or stop at any available station.
1. Press MENU button, turn SCROLL knob to select “Scan setting”, and then press SCROLL
knob to confirm.
2. Turn SCROLL knob to select “Strong Stations Only”, and then press SCROLL knob to
confirm. The scans stop only at stations with good signal strength.
3. Turn SCROLL knob to select “All Stations”, and then press SCROLL knob to confirm. The
scans stop at any available station. This may result in a poor quality audio from weak
stations.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
quality audio. The audio quality can be improved using mono.
1. To pl ay w ea k st at io ns i n mo no , pr es s MENU button, turn SCROLL knob to select “Audio
setting”, and then press SCROLL knob to confirm.
2. turn SCROLL knob to select “Forced Mono”, and then press SCROLL knob to confirm.
Viewing Station Information
There is a variety of station information transmitted by broadcaster. To view currently playing
station information, press INFO button repeatedly the display will show the information through
Radio text, Program Type, Program Name, Audio info and Date.