Pinion MGU - Page 63

63
By rotating the handlebar, you can adjust the individual reach
of the thumb, depending on the riding position and the
resulting wrist angle. You can set the gear lever assignment
individually, see the "Settings" [p.73] chapter.
Mounting options
The TE1 is designed for mounting on the right-hand side of the
handlebar.
● Instead of the handlebar clamp, the TE1 can also be
installed with combination clamps from other
manufacturers (such as Magura ShiftMix3, SRAM MMX).
● The cable must be attached to the underside of the
handlebar in such a way that the adjustability of the TE1 is
guaranteed without sharply bending or crushing the cable
or putting it under tension.
● Make sure that there is no collision with the shift levers
when operating them and other components (especially the
brake).
Adjustability
To ensure optimal accessibility of the shift levers, for all hand
sizes and preferences, a wide range of adjustment options can
be selected.
● The TE1 should be positioned on the handlebar in such a
way that you do not have to remove your right hand from
the grip to reach both shift levers with your thumb.
● For optimum accessibility, the handlebar clamp can be
positioned to the left or right of the brake lever clamp. Fine
adjustments can be made via the two screw-on points on
the TE1.
● You can also change the button assignment of the TE1 in
the settings of your e-bike or in the app.