Pinion MGU - Commissioning; Switching On;Off

72
RUNNING IN MGU
Within the first 1 000 km, the lubrication improves and the
surfaces of the gears smooth out. This improves the shifting
behaviour under partial load and the shifting noise decreases
slightly over time.
If you ride with a Pinion MGU, you will notice:
● Shifting is load-dependent.
● Several gears can be shifted in quick succession.
● It is possible to shift gears while stationary and while
pedalling.
COMMISSIONING
2
3
1
5
4
Fig.11
SWITCHING ON/OFF
→ Switch on the Pinion MGU with the on/off button (1) on the
remote.
CHANGING ASSISTANCE MODE
→ Change the assistance mode with the plus/minus button
(3).