77
MAINTENANCE AND CARE (SYSTEM)
ATTENTION
Damage to components due to moisture penetration.
→ Only use or clean the electrical components (E‑Trigger,
MGU wiring harness, etc.) with cable plugs or plug caps
connected.
→ Do not use high-pressure or steam cleaners for
cleaning.
→ Clean the components only with water and neutral
soap.
→ Check before and after the ride whether the e-bike battery
is sufficiently charged.
→ Observe the safety instructions and the instructions for
cleaning and caring for your battery in the FIT battery
instructions.
IMPORTANT
The regular gearbox oil change must be carried out
professionally. Your specialist dealer is the right contact
here.
To Next Page
Loading...
