76
NOTICE SYMBOLS / ERROR MESSAGES
Error Meaning and action/restriction
Danger of ice (temperature < 4 °C): Ride carefully.
Info: Motor assistance available. The message can
be acknowledged by pressing the selection rocker.
Warning / Error: E.g. display configuration error.
Restart the system. If the problem persists, contact
your FIT dealer. For more information, see the
corresponding FIT user manual.
Service due: Your e-bike should be taken to the FIT
dealer for maintenance as soon as possible.
Motor overtemperature: Reduced power of the riding
assistance to protect the motor.
Battery protection mode (battery level and/or
temperature too low): Reduced power of the riding
assistance to protect the battery.
Low tyre pressure: Check the tyre pressure and
adjust if necessary (only with optional tyre pressure
sensors).
4D03
Relieve pedals for push assistance: Relieve the
pedals so that the bike can shift into the required
gear for push assistance.
4D08
The gear shift must be recalibrated: Stop and take
the weight off of the pedals. The MGU automatically
starts the calibration process.
52-02
Calibration necessary: Start calibration via display
menu (follow instructions).
52-03
Information on all other error messages can be found in the FIT
remote instructions.
To Next Page
Loading...
