71
● In certain situations, a gear shift may be cancelled due to
excessive load (e.g. high pedal load when stationary) to
protect the system from damage. The system will attempt
to change gear for 2 seconds. While this is happening,
noises from the shift motor can be heard. If sufficient relief
is provided within this phase, the gear change is carried
out successfully.
● Due to the system, there is an idle travel of a few degrees
after the gear shift in which the cranks offer no resistance.
This is not noticeable during normal riding. When shifting
under high load, this effect is slightly noticeable.
ASSISTANCE MODES
You can customise the assistance modes using the FIT E-Bike
Control app:
FLY
Maximum motor assistance with minimum power for
sporty riding.
FLEX
Variable motor assistance that adapts to your own
riding performance across the entire range for very
agile e-biking.
FLOW
Variable motor assistance that adapts to your own
riding performance for moderate long tours or off-road
riding in an energy-saving manner.
ECO Designed for maximum range.
OFF
No motor assistance. The e-bike rides like a normal
bicycle. All board computer functions and electric
shifting are available.
BOOST
If you press and hold the "Push assistance" button
while travelling, "FLY" mode is activated for the
duration of the button press.
To Next Page
Loading...
