82
LEGAL INFORMATION
LIABILITY FOR MATERIAL DEFECTS
The statutory liability for material defects shall apply to
damage to materials and workmanship. The liability period
applies from the date of initial purchase. Components that are
subject to normal wear and tear (e.g. chain rings and chain)
are excluded from this. Damage caused by improper handling,
improper use or improper installation or maintenance work (e.g.
opening the MGU, modifications, etc.) is also excluded.
Furthermore, we shall not be liable for any indirect or direct
consequential damage resulting from the actions stated above.
In the event of damage, contact the dealer from whom you
purchased your Pinion product. The dealer will contact the FIT
service for you in order to provide you with a solution as quickly
as possible. Do not return a defective Pinion product without
prior agreement.
SOFTWARE LICENCES
Current licence conditions for software used in Pinion systems
are available on the Pinion website.
pinion.eu/en/software/licenses
To Next Page
Loading...
