78
WHEN DO I HAVE TO GO TO THE DEALER?
● When changing to a tyre with significantly different
dimensions. Otherwise, an incorrect speed will be shown
on your display. Accordingly, the legally prescribed
maximum assisted speed (25/45 km/h) is also shifted.
● If the number of teeth of the rear belt pulley/sprocket is
changed (tamper detection system triggers).
● Change the oil every 10 000 km.
● For an update of the system.
CALIBRATION
The MGU takes care of adjusting the gear shift itself. Fine
adjustment of the MGU is not necessary. Should calibration
nevertheless be necessary, the MGU recognises this itself and
carries out a calibration.
IMPORTANT
Do not load or turn the cranks during calibration! Otherwise,
the calibration is cancelled.
To Next Page
Loading...
