Pioneer A-209R Service Manual (English)

Other manuals for Pioneer A-209R

Questions and Answers:

M
Mrs. Megan SilvaJul 26, 2025
Why is there no sound coming from my Pioneer A-209R?
- H
  Hayley MatthewsJul 26, 2025
  If your Pioneer Amplifier has no sound, ensure that the connecting cords are securely connected to the terminals. Also, verify that the terminals or connecting cord pin plugs are clean. Make sure the TAPE2 MONITOR button is set to OFF, unless you're using an adapter component. Check that the INPUT SELECTOR matches the component you want to play back (CD, TUNER, PHONO, LINE, TAPE1/MD or TAPE1/CD-R/MD). Finally, confirm that at least one of the SPEAKERS selector buttons is set to ON. If the operation of other components is incorrect, consult their operating instructions.
R
Richard BarkerAug 1, 2025
How to fix a Pioneer A-209R that won't turn on?
- R
  Randy Harrison DDSAug 1, 2025
  If your Pioneer Amplifier isn't receiving power, ensure the power plug is securely inserted into the outlet. If the amplifier is plugged into another component's power outlet (like a timer), make sure that component is turned on. Also, check that the AC INLET plug is fully inserted into the jack.
C
colinbakerAug 8, 2025
Why is the remote control not working with my Pioneer A-209R Amplifier?
- A
  Alexandra GomezAug 8, 2025
  If the remote control for your Pioneer Amplifier isn't working, first, replace the batteries with new ones. Ensure that you are operating the remote within a range of 7 meters and at an angle of 30 degrees from the unit. Verify that the remote control cord is correctly connected. Also, make sure that a fluorescent light isn't shining directly on the amplifier’s front panel remote sensor window.
B
bleeAug 13, 2025
What to do if my Pioneer Amplifier won't record tapes?
- J
  Jennifer IngramAug 13, 2025
  If you're unable to record tapes with your Pioneer Amplifier, first, ensure all connections are correctly made. If you are still experiencing difficulties, verify that the TAPE2 MONITOR button is set to OFF. If the operation of the cassette deck is incorrect, consult its operating instructions.
B
Bradley PattersonAug 19, 2025
Why is there no sound from only one speaker on my Pioneer A-209R Amplifier?

Pioneer A-209R Specifications

General

Power Output	30W (8 ohms, 20Hz - 20kHz, 0.08% THD)
Total Harmonic Distortion	0.08% (20Hz - 20kHz, 15W, 8 ohms)
Signal-to-Noise Ratio	76dB (MM), 100dB (Line)
Input Sensitivity	2.5mV (MM), 150mV (Line)
Dimensions	420 x 114 x 307 mm
Weight	6.7 kg
Signal to noise ratio	100dB
Frequency Response	5Hz to 100kHz