1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Tag forwarding on the system
menu to turn USB1 or USB2.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
! Operation returns to normal when the phone
connection is ended.
Selecting the system language
The system language can be selected from ten
languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language, they can also be displayed
on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup menu
— Bluetooth menu
— On-screen display
(English and Russian only)
— Multi language setting for DivX
(English and Russian only)
— Language for cautions
Some operations on this unit are prohib-
ited from use while driving or require
careful attention when operated. In
such cases, a caution will appear on the
display. You can change the language
for caution messages with this setting.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
! Some characters may not be displayed
properly.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
English (English)— Português (Portuguese)—
Español (Spanish)—Français (French)
—
(Persian)—Deutsch (German)—
(Thai)—Русский (Russian)— ﺍﻟﻌﺮﺑﻴﺔ (Arabic)
—
(Hebrew)
Setting the ever scroll
When ever scroll is set to On, recorded text in-
formation scrolls continuously in the display.
Set to Off if you prefer the information to
scroll just once.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Ever Scroll on the system menu
to tur n ever scroll on or off.
En
65
Section
15
Menu operations
Menu operations
To Next Page
Loading...
General
