What to do if my Pioneer CDJ-1000 CD Player doesn't eject the disc?
Check that the power plug is properly connected to the wall outlet. Also, verify the EJECT UNLOCK/LOCK button position; it should be in the [UNLOCK] position before you press the EJECT button (0).
Why won't my Pioneer CDJ-1000 start playing?
If your Pioneer CD Player doesn't start playing even after inserting a disc, it might be because the auto cue function is enabled. Try holding down the TIME MODE/AUTO CUE button for 1 second or longer to turn off the A. CUE function.
Why are the DJ functions not working on my Pioneer CDJ-1000 CD Player?
If the DJ functions on your Pioneer CD Player aren't working, it might be because the Digital Mode switch is set to the [ON] position. Set the Digital Mode switch to the [OFF] position.
Why is the disc not rotating in my Pioneer CD Player?
If the disc in your Pioneer CD Player isn't rotating, it could be due to the following reasons: * The disc rotation stops automatically if no operation has been performed for 80 minutes or more in pause mode. Playback can be restarted by pressing the PLAY/PAUSE button (6). You can also eject the disc by pressing the EJECT button (0). * When the last track on the disc is over the disc stops rotating. Playback can be restarted by pressing the PLAY/PAUSE button (6). You can also eject the disc by pressing the EJECT button (0).
Why won't my Pioneer CD Player start playing the disc?
The auto cue function might be enabled. To disable it, hold down the TIME MODE/AUTO CUE button for 1 second or longer to turn off the A. CUE function.
What to do if my Pioneer CDJ-1000 sound is distorted or noisy?
First, ensure that you're using the correct connections; connect to the audio mixer's LINE INPUT terminals and avoid the MIC terminals. Then, check for and clean any dirt from the pin plugs and amplifier terminals. If the issue persists, it might be interference from a TV set. Try switching off the TV, moving the player away from it, or plugging the player into a separate outlet.
What does error E-72 01 mean on Pioneer CD Player?
If your Pioneer CD Player displays error code E-72 01, it could be due to: * A cracked disc. Replace the disc. * A soiled or dirty disc. Clean the disc.
Why is there no sound from my Pioneer CDJ-1000 CD Player?
Several factors could be at play. Ensure your output cables are correctly and securely connected, referring to the installation instructions if needed. Verify the settings on your audio mixer, checking both the switches and volume controls. Also, inspect the pin plugs and amplifier terminals for any dirt, cleaning them if necessary. Finally, confirm that the player is not in pause mode by pressing the PLAY/PAUSE button (6).
Why does my Pioneer CDJ-1000 CD Player make loud noise with some discs?
If your Pioneer CD Player produces loud noise or stops playing with certain discs, it could be due to: * A bad scratch or warp on the disc. If so, replace the disc. * An extremely dirty disc. In that case, clean the disc.
What to do if my Pioneer CDJ-1000 CD Player disc won't eject?
If the disc in your Pioneer CD Player won't eject, try the following: * Make sure the power plug is properly connected to the wall outlet. * Check the EJECT UNLOCK/LOCK button and ensure it is set to the [UNLOCK] position before pressing the EJECT button (0).
Power| power requirements | AC 120 V, 60 Hz |
|---|---|
| power consumption | 33 W |
Operating Environment| operating temperature range | +5˚C – +35˚C |
|---|---|
| operating humidity range | 5% – 85% |
Audio Specifications| frequency response | 4 Hz – 20 kHz |
|---|---|
| signal-to-noise ratio | 115 dB or more |
| distortion | 0.006% |
Weight and Dimensions| weight | 4.2 kg |
|---|---|
| width | 320 mm |
| depth | 370 mm |
| height | 105 mm |
To Next Page
