Pioneer CDJ-800MK2 - How to Upgrade the Software of the Microcomputer

CDJ-800MK2
90
1234
1234
C
D
F
A
B
E
AUTO
BEAT
1
CALL
5. Version Check mode
TIME MODE
POWER OFF
The software version of the Display
microcomputer is displayed
(Ver. 1.00 for the first edition).
POWER ON
RELOOP/EXIT
POWER ON
The software version of
the Main microcomputer
is displayed
(Ver. 1.10 for the first
edition).
Hold the key pressed
for about 10 seconds.
CALLCALLCALL
The software version
of the Display micro-
computer is displayed
(Ver. 1.10 for the first
edition).
Mode for checking the software version of each microcomputer
• How to check the software version of the Main microcomputer
• How to check the software version of the Player microcomputer
• How to upgrade the software of the microcomputer
CDJ-800Mk2
Version up disc
Scrolling
(during downloading)
FL Display
Success
POWER OFF
POWER
Note:
• Do NOT turn off the power after the upgrade disc is loaded till it is automatically ejected. If you do, the unit may not operate
properly afterward.
• Eject a disc automatically even if updating fails.
down l oad
CDJ-800Mk2
Automatically ejected (Note)
Automatically
ejected (Note)
FL Display
down l oad
Failure
FL Display
ERROR
Repeat from
the beginning.
FL Display
COMPL ET E
2
The software version
of the audio DSP
processor is displayed
(Ver. 1.10 for the first
edition).
3
The software version
of the FPGA is
displayed
(Ver. 1.10 for the first
edition).
4
1
QUICK RETURN
AUTO
BEAT
POWER ON
POWER
2
[1] Ver. 1.00 The version of the microcomputer of a player part (main microcomputer).
[2] disp 1.00 The version of the microcomputer of a display part.
[3] DSP 1.00 The version of the audio DSP.
[4] FPGA 1.00 The version of the FPGA.
∗ Audio DSP and FPGA are the processors which performs audio processing and various signal control, and operates independently
with a player microcomputer. However, the program is stored in FLASH-ROM of a player microcomputer, and has structure
transmitted to each processor from a player microcomputer at the time of a power supply ON.