Need help?Do you have a question about the Pioneer DJM-850-K and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Sampling Rate | 96 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Effects | Beat Effect, Sound Color FX |
| USB Audio Interface | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.005% |
| Headroom | 19 dB |
| Power Consumption | 30 W |
| Crossfader Type | Magvel Fader |
| EQ/ISO | 3-band EQ |
| EQ/ISO Range | -26 dB to +6 dB |
| Mic Connection | XLR & 1/4 inch PHONE combo x 1, 1/4 inch PHONE x 1 |
| USB | 1 x USB B port |
| Sound Color FX | Noise |
| Beat Effects | Echo, Reverb, Flanger |
Details FCC compliance, and various product safety warnings and cautions.
Specifies recommended temperature, humidity, and location for unit operation.
Provides guidelines for safe listening levels and proper power cord management.
Highlights key features like USB sound card, effects, build quality, and standard layout.
Lists the items included in the product package.
Illustrates and labels all input and output terminals on the rear panel.
Details how to connect various audio devices to the unit's input and output ports.
Explains how to connect the unit to a computer using a USB cable.
Describes the necessity and function of the driver and setting utility software.
Provides critical cautions and step-by-step instructions for installing the driver software on Windows.
Details the process for installing the driver software on Mac OS X systems.
Explains how to access and use the utility for checking settings and software versions.
Guides on configuring audio data output to the computer and adjusting buffer size.
Instructions on how to check the installed driver software version.
Identifies and explains the purpose of each control on the unit's main panel.
Provides detailed explanations for various controls like level controls, EQ, and faders.
Steps for selecting input sources and adjusting output levels for sound playback.
How to connect headphones and monitor selected channels or the master output.
Covers switching fader curves and using the fader start function for DJ players.
Instructions for connecting and using microphones, including talk over features.
Explains how to switch between monaural/stereo output and adjust booth monitor levels.
Details how to use and adjust the Sound Color FX features.
Explains associating Sound Color FX with the track's beat for dynamic performances.
Introduces the Beat Effects function and its parameters like BPM measurement.
Covers connecting external effectors and controlling DJ software/sequencers via MIDI.
Lists and describes the types of Sound Color FX available on the unit.
Provides an overview of the various Beat Effect types and their basic functions.
Details the parameters and usage of Beat Effects like Spiral, Reverb, Trans, Robot, and Filter.
Explains the functionality of Roll, Slip Roll, and Rev Roll Beat Effects.
Describes how to connect external equipment using the Send/Return terminals.
Lists MIDI control change and note messages for unit operations.
Details MIDI messages for effects, fader start, and timing clock functions.
Guides on accessing and modifying user and club setup preferences.
Explains the auto standby function and the two modes of the talk over feature.
Lists common problems, their checks, and remedies for unit malfunction.
Addresses issues with monitoring effect sounds and distorted audio from analog players.
Provides technical details on power, dimensions, sampling rate, and audio characteristics.
Lists input/output terminals, load impedance, and crosstalk measurements.
Outlines the terms and conditions of the product's limited warranty in the USA and Canada.
To Next Page
