77
En
Use Other Equipment With Your Flat Panel Display
06
English
On-screen Display
This option sets the menu display to On or Off.
Note:
This setting applies to all input sources.
Power On Mode
This option automatically selects the input and volume level when the panel is turned On.
Note:
This setting applies to all input sources.
Mirror Mode
This option reverses the image displayed on the screen.
Note:
This setting applies to all input sources.
Banner PIP
Use the Banner PIP option to adjust the translucence rate and display positions of the small window in P-in-P
mode.
• Translucent: adjusts the translucent rate of the small screen in P-in-P mode between Off and 80%. If the
percentage increases, the translucent rate also increases.
• Banner PIP: adjusts the display positions of the small screen in P-in-P mode
Parameter Description
On* displays the current menu when pressing DISPLAY
Off does not display the screen when:
• pressing DISPLAY or AV SELECTION
• switching the input source
• adjusting the volume
(Screen components such as Home Menu, User
Menu and messages remain on the screen even
when setting the On-screen Display option to Off.)
*Factory default
Parameter Description
Input INPUT 1 through
INPUT 6
displays the selected input
Last* displays the last input selected
Volume Last* selects the last volume level
0 - 60 selects the volume level between 0 - 60
*Factory default
Parameter Description
On reverses the image
Off* does not reverse the image
*Factory default
Chapter_06.fm Page 77 Friday, June 20, 2008 12:04 PM
To Next Page
Loading...
