Pioneer PDP-506PE User Manual

ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
PDP-506PE
ARP3267
PLASMA DISPLAY
PDP-506PE
PDP-506PU
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
This service manual should be used together with the following manual(s).
Model Type Power Requirement Remarks
PDP-506PE WYVI AC220 - 240V
PDP-506PU KUCXC AC120V
Model No. Order No. Remarks
PDP-506PE, PDP-506PU ARP3268 SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM
Note:
Media Receivers up to Generation 5 (G5) cannot be connected with this unit.
Be sure to use a Media Receiver of Generation 6 (G6) (ex.: PDP-R06∗∗, etc.).
For details, refer to "Important Check Points for good servicing".
T-IZY SEPT. 2005 printed in Japan

Pioneer PDP-506PE Specifications

General

Brand	Pioneer
Model	PDP-506PE
Category	Monitor
Language	English

Summary

SAFETY INFORMATION

SAFETY PRECAUTIONS

Detailed safety guidelines for technicians, covering isolation transformers, protective devices, lead dress, component use, and testing.

PRODUCT SAFETY NOTICE

IMPORTANT CHECK POINTS FOR GOOD SERVICING

Key Servicing Checkpoints

Essential checks for product safety, adjustments, lubricants, cleaning, and shipping procedures.

EXPLODED VIEWS AND PARTS LIST

PACKING SECTION

REAR SECTION

FRONT SECTION

CHASSIS SECTION (1/2)

CHASSIS SECTION (2/2)

BLOCK DIAGRAMS AND SCHEMATICS

Overall Diagrams

Provides overall connection and block diagrams for the system architecture.

Assembly Block Diagrams

ADJUSTMENT

ADJUSTMENT REQUIRED WHEN THE SET IS REPAIRED OR REPLACED

Details on required adjustments when replacing assemblies or parts.

RS-232C COMMANDS

Information on RS-232C command format, definition, and usage for controlling the unit.

Service Panel Replacement Method

Step-by-step guide for replacing the service panel assembly and required adjustments.

Factory Mode Settings

Adjustment Data Backup