EasyManua.ls Logo

Pioneer PDP-4270XD - Preparation; Installing the Plasma Television; Moving the Plasma Television

Pioneer PDP-4270XD
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation 05
15
En
English
Chapter 5
Preparation
Installing the plasma television
Location
Avoid direct sunlight. Maintain adequate ventilation.
Because the plasma television is heavy, be sure to have someone
help you when moving it.
Caution
If you do not leave sufficient space above the plasma television, it
will not receive enough ventilation and will not operate properly.
Note
Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
Caution
Operating Environment
Operating environment temperature and humidity: +0 ºC to +40 ºC;
less than 85 % RH (cooling vents not blocked). Do not install this unit
in a poorly ventilated area, or in locations exposed to high humidity or
direct sunlight (or strong artificial light).
Moving the plasma television
When installing on a rack, etc., hold the plasma television as shown
below.
Over 50 cm
Over
10 cm
PDP4270XD_En.book Page 15 Friday, June 16, 2006 5:32 PM

Table of Contents

Related product manuals