Watching TV06
22
En
Using P+ / P– on the remote control unit
• Press P+ to increase the channel number.
• Press P– to decrease the channel number.
When viewing Teletext information:
• Press P+ to increase the page number.
• Press P– to decrease the page number.
See also Using Teletext on page 54 and 55.
Note
•The CHANNEL +/– buttons on the plasma television work in the
same way as P+ / P–.
• P+ / P– cannot select analogue channels that are not set to Store.
For Store, see steps 13 and 14 under Setting up analogue TV
channels manually on page 25.
• When in the DTV mode, P+ / P– also cannot pick up digital
channels that are set to skip. For Channel Skip for digital channels,
see Setting Channel Options on page 36.
• P+ / P– cannot pick up analogue channels that are not registered
as favourites. For analogue favourite channel registration, see
steps 13 and 14 under Setting up analogue TV channels manually
on page 25.
• When in the DTV mode, P+ / P– also cannot pick up digital
channels that are not registered as favourites. For digital favourite
channel registration, see Setting Channel Options on page 36.
Using 0 to 9 on the remote control unit
• Select channels directly by pressing buttons 0 to 9.
For example:
To select channel 2 (1-digit channel), press 2.
To select channel 12 (2-digit channel), press 1 then 2.
While in DTV mode, to select channel 123 (3-digit channel), press 1, 2
then 3.
When viewing Teletext information:
• View a page directly which is 3-digit page number from 100 to 899
by pressing buttons 0 to 9. See also Selecting and operating Teletext
pages on page 54.
Note
• In standby, when you press 0, the power turns on and images
come from the INPUT 1 source. Or, when you press any button
from 1 to 9, TV images display.
Tuning to your favourite (analogue) channels
If you have registered your favourite (analogue) channels, selecting
from the registered list may be the easiest way to tune to those
channels.
Note
• You can register up to 16 analogue channels as your favourite
channels. For the registration, see steps 13 and 14 under Setting
up analogue TV channels manually on page 25.
1 While watching analogue broadcasts, press ENTER to call up
the Favourite Channel List.
2 Select a favourite channel to tune in (/, / then
ENTER).
• Press RETURN to exit the Favourite Channel List.
Changing the volume and sound
Use the remote control or the control panel on the right-hand side of
the plasma television to adjust the volume.
Using
i
+ /
i
– on the remote control
• To increase the volume, press i +.
• To decrease the volume, press i –.
• VOLUME +/– on the plasma television operates the same as
i + / i –.
01
02
03
04
05
06
07
08
**********
****
****
****
****
****
****
****
09
10
11
12
13
14
15
16
**********
****
****
****
****
****
****
****
Favourites
Volume adjustment
PDP4270XD_En.book Page 22 Friday, June 16, 2006 5:32 PM
To Next Page
Loading...
Need help?
General
