Pioneer PDP-4280HD

PDP-4280HD
129
5
6
7
8
56
7
8
C
D
F
A
B
E
Main flowchart (2)...Checking VOL YNOFS3
[From the main flowchart (1)]
Display RST MASK 19 (magenta 67). / [MKS S69]
To the Recovery flowchart (2-1)
Set VOL YNOFS3 to the tentative setting value plus 15. / [VY3 ∗∗∗]
No
Ye s
Set VOL YNOFS4 to the tentative setting value plus 15. / [VY4 ∗∗∗]
Return the VOL YNOFS4 to the tentative setting value. / [VY4 ∗∗∗]
Return the VOL YNOFS3 to the tentative setting value. / [VY3 ∗∗∗]
Determine the tentative setting value for VOL YNOFS4 as the final value.
Determine the tentative setting value for VOL YNOFS3 as the final value.
Determine the tentative setting value for VOL YNOFS1 as the final value.
From the Recovery flowchart (2-1)
[Adjustment completed]
Note: Make sure that the values for VOL SUS(*1), VOL OFFSET, VOL RST P(*1), VOL XPOFS1,2(*1) and VOL YNOFS1, 3, 4 are the
final setting values.
Is there erroneous discharge (abnormal lit cell)?
(Check on the PANEL 1-ADJ menu.)
*1: The tentative setting value becomes the final value.