To Next PageTo Next PageHow to fix a Pioneer PDP-435PE with no power and both red and green LEDs unlit?
If your Pioneer Monitor has no power and both the red and green LEDs are unlit, the connection between the POWER SUPPLY and PANEL IF assemblies may be disconnected. Check if this connection is properly made.
Why Pioneer PDP-435PE Monitor has no power and the green LED is not lit?
If your Pioneer Monitor has no power and the green LED is not lit, the 114-pin FPC might be defective. Check if the FPC is broken or not securely inserted.
What causes an abnormal screen on a Pioneer PDP-435PE with every other dot abnormal?
If your Pioneer Monitor screen is abnormal, with data of every other dot being abnormal, it may be due to a defective 114-pin FPC. Check that an abnormal area in the screen does not change when the FPC connected to the address corresponding to the abnormal area is replaced with the one corresponding to the next address.
What to do if the Pioneer PDP-435PE Monitor remote control is not working?
If the remote control unit for your Pioneer Monitor is not working, the issue might be due to disconnected or loosely connected cables. Check that all cables are securely connected.
Why does the Pioneer Monitor power sometimes get interrupted?
If the power to your Pioneer Monitor is sometimes interrupted, it might be due to defective system cables. Ensure that all system cables are securely connected.
What to do if Pioneer PDP-435PE Monitor power is interrupted and red and green lights appear?
If the power to your Pioneer Monitor is interrupted and red and green warning lights appear on the screen, the system cables may not be connected properly. Check the connection of the system cables.
What to do if key input is not effective on Pioneer PDP-435PE Monitor?
If the key input on your Pioneer Monitor is not effective, it might be due to a defective KEY SCAN IC. Check if a pulse is output when the key corresponding to Pin 2 of the CN4852 is pressed.
Why is the green LED flashing on my Pioneer Monitor while the red LED is lit?
If the red LED remains lit and the green LED begins flashing (200 ms) on your Pioneer Monitor, the backup copy process was not performed when the Digital Assy was replaced.
General| Screen Size | 43 inches |
|---|---|
| Display Technology | Plasma |
| Resolution | 1024 x 768 pixels |
| Aspect Ratio | 16:9 |
| Brightness | 1100 cd/m² |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 160° (Horizontal/Vertical) |
| Input Ports | HDMI, Component, S-Video, Composite |
General safety measures including leakage current tests.
Notice regarding special safety characteristics of parts and potential hazards.
Key safety points to follow during servicing and repairs.
Procedures for product adjustments to maintain performance.
Guidance on using appropriate lubricants, glues, and replacement parts.
Recommended cleaning procedures for various parts.
Instructions for setting shipping mode and installing shipping screws.
Technical details and specifications for PDP-435PE and PRO-435PU models.
Exploded view and parts list for product packing.
Exploded view and parts list for the first chassis section.
Exploded view and parts list for the second chassis section.
Exploded view and parts list for the flame section.
Exploded view and parts list for the multi base section.
Exploded view and parts list for the rear section of the unit.
Exploded view and parts list for the front panel section.
Parts list for the Panel Chassis (435) Assy (AWU1091).
Parts list for the Panel Chassis (435) Assy B (AWU1104).
Parts list for the PDP Service Assy (AWU1096).
Overall block diagram illustrating system connections and signal flow.
Block diagram for the 43 Y Drive Assy.
Block diagram for the 43 X Drive Assy.
Block diagram for the Panel IF Assy.
Block diagram for the Digital Video Assy.
Block diagram for the HD Audio Amp Assy.
Illustrations of various signal waveforms for diagnosis.
Procedures for adjustment after replacing assemblies or parts.
Readjustment procedure for timing of control signals in Drive Assy.
Covers PCB location, LED diagnosis, factory mode, operation, backup, troubleshooting, and disassembly.
Basic information and pin arrangements for key ICs used in the unit.
Illustration and identification of front panel controls and indicators.
Illustration and identification of rear panel terminals and connectors.
