PDP-6010FD
144
1234
9. RS-232C
9.1 OUTLINE OF RS-232C COMMAND
9.1.1 PREPARED TOOLS
9.1.2 USING RS-232C COMMANDS
It is necessary to prepare the following one to use 232C command.
• PC
• Application for control
• 232C cable (straight)
∗ The setting of the Com port cannot be communicated if it doesn't do correctly.
(Please follow a set explanation of PC in the Com port)
Individual ports are provided for RS-232C and SR+ connectors with this model. Therefore, unlike the case of previous models,
which required switching of exclusive operation between these connectors on the Integrator menu, switching is no longer
required.
To Next Page
Loading...
Need help?
General