Need help?Do you have a question about the Pioneer SX-1050 and is the answer not in the manual?
General| Power Output | 120 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.1% (at rated power) |
| Tuning Range | FM, MW |
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Year Introduced | 1976 |
| Output | 150mV (line) |
| Semiconductors | 4 x FET |
Technical performance metrics for major sections like power amp, preamp, FM, and AM.
Explanation of front panel buttons, knobs, and indicators for operation.
Detailed explanation of AM, FM, and FM stereo multiplex decoding circuitry.
Explanation of equalizer, buffer, tone, and power amplifier stages.
Steps for adjusting the AM section for optimal signal reception.
Steps for adjusting the FM section for optimal signal reception.
Steps for setting DC balance and idle current in the power amplifier.
To Next Page
