Need help?Do you have a question about the Pioneer SX-720 and is the answer not in the manual?
General| Damping Factor | 30 |
|---|---|
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Type | Stereo Receiver |
| Input Sensitivity | 150mV (line) |
| Signal to Noise Ratio | 70dB (MM) |
| Semiconductors | 20 x transistors |
Details power output, harmonic distortion, damping factor, and input/output characteristics.
Covers usable sensitivity, quieting sensitivity, separation, selectivity, and response.
Lists sensitivity, selectivity, image response, IF response, and AM suppression.
Includes power requirements, consumption, dimensions, and weight.
Details power, tuning meters, indicators, and tuning controls on the front panel.
Describes audio adjustment, tape monitoring, function selection, and volume controls.
Illustrates the overall signal flow and major component blocks of the receiver.
Detailed descriptions of the AM/FM tuners, equalizer, and power amplifier sections.
Explanation of the fluorescent indicator tube drive circuit and power indicator operation.
Step-by-step instructions for disassembling the receiver, including side boards, top, bottom, and front panels.
Detailed steps for correctly stringing the dial cord for the tuning mechanism.
Diagrams and labels identifying components on the front panel and after panel removal.
Diagrams identifying components on the rear panel and top view of the unit.
Procedure for adjusting tuning capacitors and coils for optimal FM reception.
Steps to adjust VR5 and T1 core for proper FM stereo demodulation.
Procedure for adjusting T4, T5, TC4, and TC5 for optimal AM sensitivity.
Includes idle current and output indicator adjustment procedures.
Diagram showing the breakdown of exterior components with a parts list.
Diagram showing the breakdown of interior components.
Detailed list of internal parts with part numbers and descriptions.
Details the packing materials and method for safely shipping the receiver.
Illustrations of the external appearance of various transistors and ICs used in the unit.
Diagram showing how the main circuit boards are interconnected within the receiver.
Lists semiconductors, fuses, and lamps with their part numbers and descriptions.
Detailed list of capacitors and resistors with part numbers and specifications.
Lists diodes, terminals, LEDs, and other miscellaneous parts for the receiver.
Compares miscellaneous parts, assembly, packing, and furnished parts between SX-3600 and SX-720 models.
Schematic diagram and PCB layout for the FL Assembly (AWV-014) of the SX-720.
To Next Page
