Need help?Do you have a question about the Pioneer SX-700L and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning range | FM, MW |
| Frequency response | 20Hz to 20kHz |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Signal to noise ratio | 90dB (line) |
Operates tuning, adjusts volume, and selects program sources.
Adjusts bass, treble, balance, and FM muting.
Manages tape monitoring, band status, and private headphone listening.
Controls power and indicates FM stereo reception.
Displays signal strength and manages station presets.
Indicates tuning frequency and engages manual tuning.
Details tuner sections, vari-caps, and LSI tuning system.
Covers fine tuning, memory, muting, and meter functions.
Explains band switching, manual/preset tuning, and memory operations.
Describes LSI pins for tuning, band selection, and data output.
Locates components on the front panel.
Locates components on the rear panel.
Locates internal components visible from the top.
Adjusts tuning voltage for MW and FM bands.
Calibration steps for FM signal generator inputs.
Calibration steps for the FM MPX decoder circuit.
Calibration steps for the AM LW band tuner.
Calibration steps for the AM MW band tuner.
Checks and adjusts power amplifier output voltage.
To Next Page
