Pipe Trades Pro 4095 - Page 16

16 — PIPE TRADES PRO™
Second press of  :
(Area displays) AREA Std.
 AREA 0. SQ FEET
 AREA 0. SQ INCH
 AREA 0. SQ M
 (repeats options) AREA Std.
Third press of  :
(Volume displays) VOL Std.
 VOL 0. CU FEET
 VOL 0. CU M
 (repeats options) VOL Std.
Fourth press of  :
(Meter Linear displays) METR 0.000 M
 (floating point) METR FLOAt M
 (repeats options) METR 0.000 M
Fifth press of  :
(Decimal Degree displays) DEG 0.00º
 (floating point) DEG FLOAt
 (repeats options) DEG 0.00º
Sixth press of  :
(Fractional mode) FRAC Std.
 FRAC COnSt.
 (repeats options) FRAC Std.
Seventh press of  :
(Mathematical Operation) MATH OrdEr
 MATH CHAIn
 (repeats options) MATH OrdEr
(cont'd)
KEYSTROKE DISPLAY