Pipe Trades Pro 4095 - APPENDIX B Default Settings

54 — PIPE TRADES PRO™
APPENDIX B – Default Settings
After a Clear All (  ), your calculator will return to the
following settings:
Stored Values Default Value
Material Steel
Pipe Type Standard
Elbow Type Long Radius Butt Weld
Weight to Volume 62.42796 pounds per cubic foot
Welder's Gap 1/8 inch
If you replace your batteries or perform a Full Reset* (press  ,
hold down  , and press  ), your calculator will return to the
following settings (in addition to those listed above):
Preference Settings Default Value
Fractional Resolution 1/16
Area Display Standard
Volume Display Standard
Meter Linear Display 0.000
Decimal Degree Display 0.00°
Fractional Mode Standard
Mathematical Operations Order of Operations Method
*Depressing the Reset button located above the  key will also perform a
Full Reset.