Piper ARCHER III - Page 103

(3) Cruise Power 65%
(4) Cruise Speed 117 Kts.*
(5) Cruise Fuel Consumption 9.5 gal./hr.
(6) Cruise Time
(e)(2) divided by (e)(4),
(282 nm divided by 117 kts) 2.4 hrs.
(7) Cruise Fuel
(e)(5) multiplied by (e)(6),
(9.5 gal./hr multiplied by 2.4 hrs) 22.8 gal..
(f) Total Flight Time
The total flight time is determined by adding the time to climb,
the time to descend and the cruise time. Remember! The time values
taken from the climb and descent graphs are in minutes and must
be converted to hours before adding them to the cruise time.
The following flight time is required for the flight planning
example.
(1) Total Flight Time
(c)(3) plus (d)(1) plus (e)(6),
(.15 hr plus .17 hr plus 2.4 hrs) 2.7 hrs
(g) Total Fuel Required
Determine the total fuel required by adding the fuel to climb,
the fuel to descend and the cruise fuel. When the total fuel (in
gallons) is determined, multiply this value by 6 lb./gal. to determine
the total fuel weight used for the flight.
The total fuel calculations for the example flight plan are
shown below.
(1) Total Fuel Required
(c)(5) plus (d)(3) plus (e)(7),
(2 gal. plus 1.9 gal. plus 22.8 gal.) 26.7 gal.
(26.7 gal. multiplied by 6 lb./gal.) 160.2 lbs
*reference Figure 5-20a
(3) Cruise Power 65%
(4) Cruise Speed 117 Kts.*
(5) Cruise Fuel Consumption 9.5 gal./hr.
(6) Cruise Time
(e)(2) divided by (e)(4),
(282 nm divided by 117 kts) 2.4 hrs.
(7) Cruise Fuel
(e)(5) multiplied by (e)(6),
(9.5 gal./hr multiplied by 2.4 hrs) 22.8 gal..
(f) Total Flight Time
The total flight time is determined by adding the time to climb,
the time to descend and the cruise time. Remember! The time values
taken from the climb and descent graphs are in minutes and must
be converted to hours before adding them to the cruise time.
The following flight time is required for the flight planning
example.
(1) Total Flight Time
(c)(3) plus (d)(1) plus (e)(6),
(.15 hr plus .17 hr plus 2.4 hrs) 2.7 hrs
(g) Total Fuel Required
Determine the total fuel required by adding the fuel to climb,
the fuel to descend and the cruise fuel. When the total fuel (in
gallons) is determined, multiply this value by 6 lb./gal. to determine
the total fuel weight used for the flight.
The total fuel calculations for the example flight plan are
shown below.
(1) Total Fuel Required
(c)(5) plus (d)(3) plus (e)(7),
(2 gal. plus 1.9 gal. plus 22.8 gal.) 26.7 gal.
(26.7 gal. multiplied by 6 lb./gal.) 160.2 lbs
*reference Figure 5-20a
SECTION 5
PA-28-181, ARCHER III PERFORMANCE
SECTION 5
PA-28-181, ARCHER III PERFORMANCE
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: NOVEMBER 18, 1996 5-7
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: NOVEMBER 18, 1996 5-7