SECTION 8
HANDLING, SERV & MAINT PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
8-20 REVISED: JANUARY 29, 2007
(f) Cleaning Carpets
To clean carpets, first remove loose dirt with a whisk broom or
vacuum. For soiled spots and stubborn stains use a non-flammable dry
cleaning fluid. Floor carpets may be removed and cleaned like any
household carpet.
8.29 COLD WEATHER OPERATION
For cold weather operation a winterization plate is installed on the inlet
opening of the oil cooler duct on the left rear engine baffle. This plate should
be installed whenever the ambient temperature reaches 50°F or less. The
plate should be removed and stored in the cockpit when the ambient
temperature exceeds 50°F.
It is recommended that an optional Engine Breather Tube Winterization
Kit be installed for cold weather operation. This kit is available through your
Piper Dealer/Distributor.
SECTION 8
HANDLING, SERV & MAINT PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
8-20 REVISED: JANUARY 29, 2007
(f) Cleaning Carpets
To clean carpets, first remove loose dirt with a whisk broom or
vacuum. For soiled spots and stubborn stains use a non-flammable dry
cleaning fluid. Floor carpets may be removed and cleaned like any
household carpet.
8.29 COLD WEATHER OPERATION
For cold weather operation a winterization plate is installed on the inlet
opening of the oil cooler duct on the left rear engine baffle. This plate should
be installed whenever the ambient temperature reaches 50°F or less. The
plate should be removed and stored in the cockpit when the ambient
temperature exceeds 50°F.
It is recommended that an optional Engine Breather Tube Winterization
Kit be installed for cold weather operation. This kit is available through your
Piper Dealer/Distributor.
To Next Page