SECTION 4 - NORMAL PROCEDURES
Normal operating procedures are described in the BF Goodrich Aerospace
WX-500 Stormscope Users Guide, p/n 009-11501-001, Rev. A, dated
September 10, 1997, or later appropriate revision.
SECTION 5 - PERFORMANCE
No change.
SECTION 6 - WEIGHT AND BALANCE
Factory installed optional equipment is included in the licensed empty weight
and balance data in Section 6 of the Pilot’s Operating Handbook.
SECTION 7 - DESCRIPTION AND OPERATION
A. OPERATING PROCEDURES
See the BF Goodrich Aerospace WX-500 Stormscope Users Guide for a
complete description of the WX-500 system.
B. PILOT’S DISPLAY (Airplane Dependent)
The BF Goodrich Aerospace WX-500 Stormscope’s data will appear on
either of the Garmin GNS 430’s.
SECTION 4 - NORMAL PROCEDURES
Normal operating procedures are described in the BF Goodrich Aerospace
WX-500 Stormscope Users Guide, p/n 009-11501-001, Rev. A, dated
September 10, 1997, or later appropriate revision.
SECTION 5 - PERFORMANCE
No change.
SECTION 6 - WEIGHT AND BALANCE
Factory installed optional equipment is included in the licensed empty weight
and balance data in Section 6 of the Pilot’s Operating Handbook.
SECTION 7 - DESCRIPTION AND OPERATION
A. OPERATING PROCEDURES
See the BF Goodrich Aerospace WX-500 Stormscope Users Guide for a
complete description of the WX-500 system.
B. PILOT’S DISPLAY (Airplane Dependent)
The BF Goodrich Aerospace WX-500 Stormscope’s data will appear on
either of the Garmin GNS 430’s.
SECTION 9
PA-28-181, ARCHER III SUPPLEMENT 11
SECTION 9
PA-28-181, ARCHER III SUPPLEMENT 11
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: JULY 14, 2000 3 of 4, 9-61
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: JULY 14, 2000 3 of 4, 9-61
To Next Page