SECTION 9
PA-28-181, ARCHER III SUPPLEMENT 13
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: JANUARY 2, 2001 9 of 10, 9-79
SECTION 9
PA-28-181, ARCHER III SUPPLEMENT 13
ISSUED: JULY 12, 1995 REPORT: VB-1611
REVISED: JANUARY 2, 2001 9 of 10, 9-79
SECTION 7 - DESCRIPTION AND OPERATION (continued)
Automatic ALT/STBY Mode Switching
If the GTX 327 is configured for automatic standby switching, the mode will
automatically change to ALT when a squat switch senses that the aircraft has
become airborne. Also, the mode will change to STBY automatically when a
squat switch senses that the aircraft has touched down. Additionally, a delay
time can be set in the Configuration Mode, causing the GTX 327 to wait a
specified length of time after landing before automatically changing to STBY
mode.
SECTION 7 - DESCRIPTION AND OPERATION (continued)
Automatic ALT/STBY Mode Switching
If the GTX 327 is configured for automatic standby switching, the mode will
automatically change to ALT when a squat switch senses that the aircraft has
become airborne. Also, the mode will change to STBY automatically when a
squat switch senses that the aircraft has touched down. Additionally, a delay
time can be set in the Configuration Mode, causing the GTX 327 to wait a
specified length of time after landing before automatically changing to STBY
mode.
To Next Page