SECTION 9
SUPPLEMENT 17 PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
9-96 2 of 4 REVISED: JANUARY 2, 2001
SECTION 1 - GENERAL
The S-TEC DME-450 system is a full feature, solid state, remote mounted
system with full 200 channel capability. For long distance operation, it
provides a full 100 watts maximum pulse power transmitter output.
The IND-450 indicator (see figure 1) provides selectable read-out of distance
to/from the station, ground speed, and time to/from the station. Features also
include automatic display dimming and waypoint annunciation.
SECTION 2 - LIMITATIONS
No change.
SECTION 3 - EMERGENCY PROCEDURES
No change.
SECTION 4 - NORMAL PROCEDURES
DME OPERATION
• DME Mode Selector Switch - Set to DME 1 or DME 2
• NAV 1 and NAV 2 VHF Navigation Receivers - ON; SET FREQUENCY to
VOR/DME station frequencies, as required.
NOTE
When the VOR frequency is selected, the appropriate
DME Frequency is automatically channeled.
• DME audio selector button (on audio selector panel) - SET to desired mode.
SECTION 5 - PERFORMANCE
No change.
SECTION 9
SUPPLEMENT 17 PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
9-96 2 of 4 REVISED: JANUARY 2, 2001
SECTION 1 - GENERAL
The S-TEC DME-450 system is a full feature, solid state, remote mounted
system with full 200 channel capability. For long distance operation, it
provides a full 100 watts maximum pulse power transmitter output.
The IND-450 indicator (see figure 1) provides selectable read-out of distance
to/from the station, ground speed, and time to/from the station. Features also
include automatic display dimming and waypoint annunciation.
SECTION 2 - LIMITATIONS
No change.
SECTION 3 - EMERGENCY PROCEDURES
No change.
SECTION 4 - NORMAL PROCEDURES
DME OPERATION
• DME Mode Selector Switch - Set to DME 1 or DME 2
• NAV 1 and NAV 2 VHF Navigation Receivers - ON; SET FREQUENCY to
VOR/DME station frequencies, as required.
NOTE
When the VOR frequency is selected, the appropriate
DME Frequency is automatically channeled.
• DME audio selector button (on audio selector panel) - SET to desired mode.
SECTION 5 - PERFORMANCE
No change.
To Next Page
Loading...
