Piper ARCHER III - Page 358

SECTION 9
SUPPLEMENT 23 PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
9-156, 4 of 36 REVISED: FEBRUARY 14, 2006
SECTION 1 - GENERAL (continued)
A B&C Specialties, BC410 standby alternator, when ON, will automatically
activate in the event of a failure in the primary alternator, therefore replacing the
primary alternator function, but not supplementing its output. The alternator is
gear driven through the engine vacuum pump drive pad.
The standby alternator is rated for 20 amperes of maximum load. The actual load
available for use is dependent on engine rpm and current operating conditions.
SECTION 9
SUPPLEMENT 23 PA-28-181, ARCHER III
REPORT: VB-1611 ISSUED: JULY 12, 1995
9-156, 4 of 36 REVISED: FEBRUARY 14, 2006
SECTION 1 - GENERAL (continued)
A B&C Specialties, BC410 standby alternator, when ON, will automatically
activate in the event of a failure in the primary alternator, therefore replacing the
primary alternator function, but not supplementing its output. The alternator is
gear driven through the engine vacuum pump drive pad.
The standby alternator is rated for 20 amperes of maximum load. The actual load
available for use is dependent on engine rpm and current operating conditions.