EasyManua.ls Logo

Pit Boss PB150PPS - CONTROL BOARD OPERATION

Pit Boss PB150PPS
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
13
   
 
The LCD Screen is used as the information center for
your unit. The LCD screen will display the current grill
temperature (ACTUAL) and meat probe temperature (MP1).
See
Troubleshooting
for more information on error codes.
 
Flashing
Screen
Indicates the unit was just connected to
AC power. Screen flashes three times, then
turns off.
1 Indicates the meat probe temperature
when probe is connected.
Actual Indicates the current temperature of unit.
Set Indicates the desired temperature that has
been selected.
noP Indicated that no meat probe is connected.
Er1 Grill Probe wire not connecting.
Er2 Failure to reach minimum temperature of
130F during start-up cycle.
Er3 Fire has gone out due to lack of fuel.
ErH Grill has overheated.
ErP Power loss during operation.
 
Motor Indicates the auger motor is turning and
feeding pellets to the Burn Pot.
Ignitor Indicates the igniter is on. When first
starting your unit, the igniter runs
continuously for the start-up cycle.
Fan Indicates the fan is running. If the grill is in
operation, the fan is on.
o Pellet Indicates the auger motor is no longer able
to feed pellets to the Burn Pot. Likely, the
hopper is empty and requires refilling.
Press and hold the Prime Button to activate an extra feed of
pellets to the Burn Pot. This can be used to add more fuel to
the fire just before opening the barrel lid, resulting in a quicker
heat recovery time. It can also be used to add more fuel while
smoking, to increase the intensity of clean smoke flavor.
Overfeeding the Burn Pot may damage to grill barrel paint.
The Temperature Switch Button is used to change the
temperature readout on the LED Screen. Press the button
to switch to Fahrenheit (ºF) or to Celsius (ºC), as preferred.
Default is set to Fahrenheit.
FC
MP1
Actual
Set
IGNITOR
NO
PELLET
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
PRIME
F/C
300
350
250
225 400
450
475
SMOKE
OFF
HIGH
200
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
PRIME
F/C
300
350
250
225 400
450
475
SMOKE
OFF
HIGH
200
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
PRIME
F/C
300
350
250
225 400
450
475
SMOKE
OFF
HIGH
200
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
PRIME
F/C
300
350
250
225 400
450
475
SMOKE
OFF
HIGH
200

Table of Contents

Other manuals for Pit Boss PB150PPS

Related product manuals