13
LCD Screen Displays grill temperature, smoke setting ("" ),
igniter, temperature status, and error.
Temperature Dial Select one of the following: , , or one of
the eight temperature presets.
"P" SET
(0-7)
Select one of the seven temperature fine
tunings. Allows for larger temperature control to
accommodate to your cooking style and cooking
environment. Best used when the temperature dial
is in mode. The default setting is 4.
SMOKE
(Start-up/LOW)
Start-up the grill at this temperature. The
grill operates in a timed mode at the lowest
temperature. This level can be adjusted using the
"" button. This setting works in conjunction
with the temperature dial presets.
HIGH Grill operates at the highest heat level. When the lid
is open, the grill will run at this speed.
888 Displays momentarily when the grill is connected to
AC power.
Temperature Grill temperature is displayed in 5 degree (˚F)
increments.
Flashing
Temperature
When grill temperature is below 66˚C / 150˚F.
Flashing Dots Indicates the igniter is .
"" Indicates the current "P" setting selected.
"ErH" Error Message The grill has overheated, possibly due to grease fire
or excess fuel.
"ErR" Error Message Temperature probe wire not making connection.
"ErP" Error Message Temperature dial was not OFF when last connected
to AC Power, or power outage occurred while in
operation.
300
350
250
225 400
450
475
Smoke
“P” SET
O
High
200
www.PITBOSS-GRILLS.cOm
“P” SET ACTUAL ˚F
SET
To Next Page
Loading...
Need help?
General
