EasyManua.ls Logo

Pitco SE18S - Page 4

Pitco SE18S
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
L20-246 Rev 1 (11/09)
WARRANTY STATEMENT
Pitco Frialator, Inc. makes the following limited war-
ranties to the original purchaser only for this equip-
ment and replacement parts:
1. WARRANTY PROVISIONS - FRYERS
A. Pitco Frialator, Inc. warrants all parts, with
the exception of the frypot, elements and
computer for 1 year after the date of installa-
tion of the fryer.
B. If any parts become defective during the first
year after the installation date, Pitco Friala-
tor will also pay for the labor, freight and
travel costs involved in replacing said part.
2. WARRANTY PROVISIONS - FRYPOTS
A. If a frypot develops a leak due to a defect in
material or workmanship within the first 10
years after installation, Pitco Frialator, Inc.
will either weld or replace, at its discretion,
the frypot.
B. The customer will be responsible for all
freight, labor and travel charges for this re-
pair.
3. WARRANTY PROVISIONS - COMPUTER
A. Pitco Frialator, Inc. will warrant the Intelli-
fry Computer from defects in material or
workmanship for a period of two years.
B. If the computer is found to be defective
after the first year the customer will be
responsible for all freight, labor and travel
charges for this repair.
4. WARRANTY PROVISIONS - ELEMENTS
A. Pitco Frialator, Inc. will warrant the Electric
Elements from defects in material or work-
manship for a period of 3 years.
B. The customer will be responsible for all
freight, labor and travel charges for this re-
pair.
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE.
WARNING:
IMPROPER INSTALLATION, ADJUST-
MENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ
THE INSTALLATION, OPERATING AND
MAINTENANCE MANUALS THOR-
OUGHLY BEFORE INSTALLING OR SER-
VICING THIS EQUIPMENT.
WARNING:
This machine is intended to be hard wired
when installed in its final location.
WARNING:
If a manufacturer supplied cord is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified person in
order to avoid a hazard.
Retain this manual for future reference.
ENGLISH

Related product manuals