Pitco SG14 User Manual

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
Phone (800) 258-3708 • (603) 225-6684 • Fax (603) 225-8472 • www.pitco.com
L10-127 Rev 05 (04/08)
Model SG14
Tube Fired Gas Fryer
Project __________________________
Item number _____________________
Quantity _________________________
APPROVALS
 CSA Certified
(AGA, CGA)
 NSF Listed
 MEA Approved
 CE Certified
 Australian Gas Assoc.
Certified (AuGA)
Patent Pending
Model SG14
STANDARD ACCESSORIES
 Choice of basket options
 Two nickel-plated, oblong, wire mesh baskets
 One nickel-plated, square, wire mesh basket
 One nickel-plated tube rack
 One drain extension
 One drain line clean-out rod
 Fryer cleaner sample
 Rear gas connection
 Manual gas shutoff
 1 1/4” (3.2 cm) full port drain valve
 Built-in integrated flue deflector
 Removable basket hanger for easy cleaning
 9” (22.9 cm) adjustable legs
 Cabinet - stainless steel front, door, and sides
 Tank - mild steel
AVAILABLE OPTIONS & ACCESSORIES
 Stainless steel tank
 Stainless steel back
 9” (22.9 cm) adjustable casters
 Triple baskets
 Covers
STANDARD SPECIFICATIONS
CONSTRUCTION
 Welded tank with an extra smooth peened finish ensures
easy cleaning.
 Long-lasting, high-temperature alloy stainless steel heat
baffles are mounted in the heat exchanger tubes to provide
maximum heating and combustion efficiency.
 Standing pilot light design provides a ready flame when heat
is required.
 Stainless steel front, door, side, and splashback.
 Heavy duty 3/16” (.48 cm) door hinge.
CONTROLS
 Millivolt thermostat maintains selected temperature
automatically between 200°F (93°C) and 400°F (190°C-CE).
 Integrated gas control valve acts as a manual and pilot valve,
automatic pilot valve, gas filter, pressure regulator, and
automatic main valve.
 Gas control valve prevents gas flow to the main burner until
pilot is established and shuts off all gas flow automatically if
the pilot flame goes out.
 Temperature limit switch safely shuts off all gas flow if the
fryer temperature exceeds the upper limit.
 New Solstice burner/baffle design.***
-Increases cooking production.
-Lowers flue temperature.
-Improves working environment.
-Generates more production per BTU.
***Compared to previous models.
OPERATIONS
 Front 1
1/4” (3.2 cm) full port drain for quick draining.
 9” (22.9 cm) clearance allows for ease of cleaning.

Pitco SG14 Specifications

General

Fryer Type	Gas
Construction	Stainless Steel
Model	SG14
Frying Area	14" x 14"
Gas Type	Natural Gas or Propane

Summary

Standard Accessories

Standard Specifications

Construction

Welded tank with smooth peened finish for easy cleaning, featuring heat baffles and stainless steel components.

Controls

Millivolt thermostat for temperature control and integrated gas control valve with safety features.

Operations

Features a front 1 1/4" drain valve and 9" clearance for ease of cleaning.

Approvals

Certified by CSA, NSF, MEA, CE, and Australian Gas Association.

Gas Requirements

Gas Input and Store Pressure

Specifies BTU input per hour and recommended minimum store manifold pressure for natural and L.P. gas.

Burner Manifold Pressure

Details the required burner manifold pressure for natural and L.P. gas.

Clearance Information

Specifies minimum clearance from the fryer front, sides, rear, and bottom to combustible materials.

Fryer Flue Area

Instruction not to block or restrict flue gas flow into the ventilation system.

Electrical and Shipping Information

Electrical Specifications

Details voltage, phase, frequency, and amperage requirements.

Shipping Information

Provides shipping weight, cube, and dimensions (H x W x L).

Performance and Specifications

Oil Capacity

Specifies the oil capacity range in pounds and kilograms.

Performance Characteristics

Outlines frying capacity per hour and cooking area dimensions.

Short Form Specification

Describes the fryer's atmospheric burner system, heat tubes, baffles, and deep cool zone.