Got questions? We’ve got answers! 2 Call 800-358-4983
Impulse Package Contents
Start gate 2 deceleration towels
Finish gate 2 finish detector pigtails
4 gate supports 8 support mounting screws
8 steel pull pins 70-foot DIN cable
Spool of monofilament line Control box
2 launch pods 2 six-inch strips of Velcro
®
material
Power supply (12V, 2.5A) 2 black ABS line anchors*
2 launch triggers (1 red and 1 black) Start mat*
USB cable GII Race Management CD-ROM (Windows)
Please find the above items in the Impulse GII package. Make sure all components are present and
undamaged. Report any missing or damaged items to Pitsco Customer Service at 800-358-4983.
Note: Colors of some hardware items may vary.
Required Equipment and Materials (not included)
#2 Phillips screwdriver
Duct tape*
*floor use only
Figure 1
To Next Page
Loading...