pitsco tetrix prime User Manual

Joints can be made more permanent by using a thumbscrew and wing nut to secure the beams and connectors.
TIP: Wing nuts are placed in position first and
thumbscrews are tightened into them. After wing nuts
are placed and seated properly, they cannot be turned.
TIP: Thumbscrews should
be snug but not overtightened.
Overtightening thumbscrews can
damage components.
Building and Coding the PULSE CodeeBot 63

pitsco tetrix prime Specifications

General

Brand	pitsco
Model	tetrix prime
Category	Robotics
Language	English