Activity 6: Build the PULSE Codee Bot
Introduction
You need a robot. Because the focus of this guide is on working with PULSE and
the TETRIX Ardublockly software, you do not need a complicated robot. With that in
mind, you will create the PULSE Codee Bot. The Codee Bot is meant to be simple,
easy to build, and exactly what you need for the purposes of this guide without any
unnecessary parts.
That being said, everything you learn with this basic bot can be transferred to a
more complicated bot as you continue on your robotics journey. The Codee Bot
uses two DC motors and PRIME wheels mounted on either side to make a perfect
test vehicle for your work with PULSE.
You will start with a basic drive frame and add more to it in later activities. You
can complete this build even if you have little to no experience with metal-based
building systems.
Building Time Expectations
30 minutes
Real-World Link
In manufacturing and assembly, it’s important to be able to follow instructions
exactly. Try making a piece of furniture without following the instructions and it will
likely have to be redone. Being able to follow a detailed procedure of steps is an
important skill that is used in a multitude of real-life applications.
Careers: machine operator, roboticist, engineer
STEM Connections
• Science
Ĕ Wheel and axle
Ĕ Screw
• Technology
Ĕ Materials
Ĕ Fasteners
• Engineering
Ĕ Machine design
Ĕ Construction
• Math
Ĕ Length
Ĕ Diameter
Teacher Note: Other factors
can affect building time,
including matters such as set
organization and whether
the builder has a partner.
The building time is only an
estimate. Actual time might
vary.
Building and Coding the PULSE CodeeBot 69
To Next Page
Loading...
Need help?
General
