16.3 dual oscillator synth voice patch
Adding oscillator 2 to the default patch creates a larger, richer, dual oscillator
synthesizer voice. Only 2 patch cables are necessary. Add pitch tracking to
oscillator 2 by patching the [v/o output jack] into the [oscillator 2 v/o input jack].
Add the saw wave from oscillator 2 to the audio signal path by patching into the
mixer. Adjust the frequency of oscillator 2 to a musical variant of oscillator 1. Try
patching other waveforms from both oscillator 1 and oscillator 2."
To Next Page
Loading...
