Do you have a question about the Pittsburgh Modular lifeforms sv-1 and is the answer not in the manual?
Brand | Pittsburgh Modular |
---|---|
Model | lifeforms sv-1 |
Category | Synthesizer |
Language | English |
Details crucial ribbon cable connection and polarity protection for safe operation.
Explains the voltage-controlled analog state variable filter.
Details the four-stage envelope generator for shaping signals.
Explains the VCA for attenuating or amplifying signals.
Describes Oscillator 1 as a wide-range analog waveform generator.
Details the frequency, fine tune, V/O, FM, and width controls for Osc 1.
Lists the available waveform outputs from Oscillator 1.
Describes Oscillator 2 as a wide-range analog waveform generator.
Details the frequency, fine tune, V/O, and FM controls for Osc 2.
Lists the available waveform outputs from Oscillator 2.
Describes the analog, voltage-controlled state variable filter.
Details filter controls and outputs: cutoff, resonance, and HP/BP/LP.
Explains the four-stage envelope generator for shaping signals.
Details ADSR controls: attack, decay, sustain, release, and I/O.
Explains the VCA for attenuating or amplifying signals.
Details VCA controls and inputs/outputs.
Details the procedure for performing a factory reset on the MIDI module.
Explains the calibration process for the MIDI module's V/O output.
Details calibration steps for Oscillator 1's waveform shapes.
Explains the calibration procedure for Oscillator 1's pitch tracking.
Details calibration steps for Oscillator 2's waveform shapes.
Explains the calibration procedure for Oscillator 2's pitch tracking.
Details the calibration procedure for the filter's frequency and resonance.