1 7
1 6
Receiver directs to convert the input signal source of transmitter.
Press [CCTV/AV] when camera's LV mode is on and AV signal has connected to transmitter, the input
signal source of transmitter will convert between AV and CCTV.
Under the CMOS mode, slightly press the Enlarge and Check button [ ] to enlarge display
function, and the Screen display effect will be magnified one times. Press [up/down]/[right/left]
to move the displaying scope. Press [ ] again to exit enlarge display function.
Press [ ] for two sec to get in Review mode; LCD shows the saved picture in the receiver.
Press [ ] again to exit Review mode.
In review mode, available to paging-through, delete or delete all images in receiver.
Press [right/left] to page through the saved image.
Press [OK] to exit delete menu, press [up/down] to select the choice, press [OK] to confirm the
choice.
Available to delete one or delete all images.
1.
2.
3.
5.
4.
Switching Signal Source
Enlarge and review
UsageUsage
To Next Page
Loading...
