1 9
1 8
Sleep/Wake-up mode Menu
LCD Brightness adjustment
Volume adjustment
Under operation status, hold [CHANNEL SWITCH/WAKE UP] for two sec, and the screen will get into
sleeping mode.
Under sleeping mode, hold [CHANNEL SWITCH/WAKE UP] for two sec, and the screen will get into
monitor mode.
*Setting sleep mode in menu.
Under operation status, press [right/left] to adjust the screen brightness. The LCD brightness is
divided into ten grades; the current grade is shown on the right bottom corner when adjusting.
Under operation status, press [up/down] to adjust the volume. The volume is divided into ten grades;
the current grade is shown on the right bottom corner when adjusting.
*Receiver would have the audio output when transmitter has audio input.
1. Press [MENU] to enter the menu.
2. Press [right/left] to select submenu. Press [up/down] to select items in submenu.
3. Press [OK] to execute the selected item.
SLEEP:
Sleeping mode setting: No Sleep (OFF), One minute into Sleep(1 MIN), Three
minutes into Sleep(3 MIN), Five minutes into Sleep(5 MIN), Seven minutes
into Sleep(7 MIN).
SYNC:
Sync code-matching setting: enter code-matching mode (YES), exit code-
matching mode (NO).
S A V E
S Y N C
S Y N C
S L E E P
S L E E P
Y E S
O F F
N O
1 M I N
3 M I N
UsageUsage